beautypg.com

At a glanc e, Climate control status display – Mercedes-Benz C-Coupe 2012 COMAND Manual User Manual

Page 38

background image

X

Select

Sound

by sliding VÆ and turning

cVd the COMAND controller and press

W to confirm.

X

Select

surround

and press W to confirm.

Setting surround sound (example)

X

Select

Logic7

®

On

or

Logic7

®

Off

by

turning cVd the COMAND controller and

press W to confirm.

Depending on your selection, surround

sound is switched on or off and the menu

is exited.

X

To exit the menu without saving: press

the % back button or slide XVY the

COMAND controller.

i

Please note the following: for the

optimum audio experience for all

passengers when Logic7

®

is switched on,

the balance and fader settings should be

set to the center of the vehicle interior.

You will achieve the best sound results by

playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least

128 kbit/s.
Surround-sound playback does not

function for mono signal sources, such as

AM radio mode.
If radio reception is poor, e.g. in a tunnel,

you should switch off Logic7

®

, as it may

otherwise switch between stereo and

mono and cause temporary sound

distortions.
On some stereo recordings, the sound

characteristics may differ from

conventional stereo playback.

Climate control status display

If you change the settings of the climate

control system (see the vehicle Operator's

Manual), the climate status display appears

for three seconds at the bottom of the screen

in the COMAND display. It displays the

current settings of the various climate control

functions.
The climate status display appears when:

X

Turn one of the two temperature controls

and set the temperature for the left or

right

1, 2

or turn the temperature control and

set the temperature

3, 4

.

or

X

Turn the control to set the airflow

3, 4

.

or

X

You press one of the following buttons:
K Increases air flow

1, 2

I Decreases air flow

1, 2

¿ Switches climate control on/off

1, 2, 3

á Switches the ZONE function on/

off

1, 2

1

Available for 2-zone automatic climate control.

2

Available for 3-zone automatic climate control.

3

Available for the air-conditioning system.

4

Available for Heatmatic.

36

Climate control status display

At

a

glanc

e