Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 179)

Selecting a track
This function is not supported by all
Bluetooth ® audio devices.
X
To skip forwards or backwards to a
track: press the E or F button on
COMAND.
or
X Press the 9 or : button briefly on
the multifunction steering wheel.
X Rapid scroll: press and hold the 9
or : button on the multifunction
steering wheel until the desired track is
reached.
If you hold down the 9 or : button,
the system runs through the list more
quickly.
Selecting playback options
If the Bluetooth ® audio device supports the
corresponding function, the following options
are available:
R Normal Track Sequence
The tracks are played in the normal order
(e.g. track 1, 2, 3, etc.).
Audio data playback is determined by the
order in which the tracks are written to the
data carrier. Alphabetical order is the most
common. Once all the tracks in a folder
have been played, the tracks in the next
folder are played.
R Random Tracks
All the tracks on the medium are played in
random order (e.g. track 3, 8, 5 etc.).
X Select BT Audio by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
The # dot indicates the option selected.
X Select the option by turning cVd the
COMAND controller and press W to
confirm.
If you select Random Tracks , you will see
a corresponding symbol in the display/
selection window.
Adjusting the sound settings
The sound settings are described using radio
mode as an example in the "Basic functions
of COMAND" section (
Y
page 34).
Increasing the volume using COMAND
X Select BT Audio by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X Select Volume and press W to confirm.
A menu appears. The # dot indicates the
current setting.
X Select Standard or Boost and press W to
confirm.
You will find further information in the "Audio
AUX mode" section (
Y
page 182).
Bluetooth ® audio mode 177
Audio
Z