Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 44)

Calling up displays
X Press the W button.
X In the system menu, slide ZV the
COMAND controller up until the Full
Screen option is selected.
X Press W the COMAND controller.
The system display is shown as full screen
(without system menu).
X
Slide XVY the COMAND controller
repeatedly until the fuel consumption
indicator appears.
The COMAND display shows the fuel
consumption for the last 15 minutes of the
journey.
Every bar of the graph displays the average
value for one minute.
The fuel consumption display may differ from
the display in the From Start trip computer
in the Trip menu; see the vehicle Operator's
Manual.
Exiting full screen view
X Press W the COMAND controller.
The system menu appears.
ON&OFFROAD display
Overview
The ON&OFFROAD display is available for the
M-Class.
The COMAND display can show the settings
and status of the ON&OFFROAD functions.
You can find more information about the
ON&OFFROAD functions and the display
itself in the vehicle Operator's Manual.
Calling up displays
X Press the W button.
X In the system menu, slide ZV the
COMAND controller up until the display/
selection window is selected.
X Slide XVY the COMAND controller until
the ON&OFFROAD display appears.
The COMAND display shows the settings
and status of the ON&OFFROAD functions.
Exiting the display
X Slide XVY the COMAND controller until
the desired display (clock or fuel
consumption) is shown.
Text reader settings
Setting the text reader speed
X Press the W button.
X Select Settings by turning cVd the
COMAND controller and press W to
confirm.
X Select Text Reader Speed and press W
to confirm.
A list appears. The # dot indicates the
current setting.
X Select a setting by turning cVd the
COMAND controller and press W to
confirm.
Voice Control System settings
Opening/closing the help window
In addition to the audible instructions, the
help window will show you other information
42
Voice Control System settings
System
settings