Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 37)

X Select a balance setting by sliding XVY the
COMAND controller and press W to
confirm.
X
Select a fader setting by sliding ZVÆ the
COMAND controller and press W to
confirm.
The setting is stored and you exit the menu.
Surround sound
General information
If your vehicle is equipped with the harman/
kardon ® Logic7 ® surround sound system,
you can set the optimum surround sound in
the vehicle interior.
The harman/kardon
® Logic7 ® surround
sound system is available for the following
operating modes:
R radio (FM only)
R satellite radio
R audio CD
R audio DVD (MLP, dts, PCM and Dolby
Digital audio formats)
R MP3 (including SD memory card and USB
storage device)
R Media Interface
R Bluetooth ® audio mode
R video DVD (PCM, dts and Dolby Digital
audio formats)
R AUX
Because some DVDs contain both stereo and
multichannel audio formats, it may be
necessary to set the audio format
(
Y
page 163).
i The Logic7 ® On function creates a
surround sound experience for every
passenger when playing, for example,
stereo recordings. It enables optimum
playback of music and films on CD, audio
DVD or video DVD with multichannel audio
formats, such as MLP, dts or Dolby Digital.
This results in sound characteristics like
those intended by the sound engineer
when the original was recorded.
i If you select Logic7 ® Off , all permissible
formats are played as stored on the
medium. Due to the design of the
passenger compartment, an optimum
audio experience cannot be guaranteed for
all passengers.
i Discs which support the audio formats
mentioned have the following logos:
Dolby Digital
dts
MLP
Switching surround sound on/off
The example describes how to set the
surround sound for radio mode.
X Press the $ function button.
The radio display appears. You will hear the
last station played on the last waveband.
Basic functions of COMAND
35
At
a
glance
Z