Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 32)

X Enter E , W , space, Y with the corresponding
keys.
i The space is entered using number key
9.
Further functions in the list with
character bar
X To delete characters: select 2 by
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
or
X Press the 2 button next to the
COMAND controller.
X To delete an entry: select the 2 icon
by sliding VÆ and turning cVd the
COMAND controller, and then press W and
hold until the entire entry is deleted.
or
X
Press and hold the 2 button next to the
COMAND controller until the entire entry is
deleted.
X
To cancel an entry: select the & icon in
the bottom left of the character bar and
press W to confirm.
or
X Press the % back button.
The address entry menu appears.
X To accept the first list entry: press W and
hold the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
Calling up the list as a selection list
Select the desired city from the selection list.
If there are several entries for a city or if
several cities of the same name are stored,
then ¬ is highlighted in the character bar.
X Press W the COMAND controller.
It is also possible to switch the city list to the
selection list at any time during character
input.
X
Slide ZV the COMAND controller
repeatedly until the city list appears as a
selection list.
or
X Select ¬ in the character bar by turning
cVd the COMAND controller and press
W to confirm.
Option 2: city list as selection list
COMAND either shows the selection list
automatically or you can call up the selection
list from the list with character bar.
The example shows the selection list after the
city NEW YORK has been entered. The entry is
highlighted automatically.
X Confirm NEW YORK by pressing W the
COMAND controller.
The address entry menu appears. You can
now enter a street, for example.
30
Operating COMAND
At
a
glance