Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 174)

X To select options: switch to the MUSIC
REGISTER (
Y
page 168).
X Select Music Register by sliding VÆ and
turning cVd the COMAND controller and
press W to confirm.
The options list appears. The # dot
indicates the option selected.
X Select an option and press W to confirm.
The option is switched on. For all options
except Normal Track Sequence , you will
see a corresponding display in the display/
selection window.
i The Normal Track Sequence option is
automatically selected when you change
the disc you are currently listening to or
when you select a different medium. If an
option is selected, it remains selected after
COMAND is switched on or off.
Bluetooth ® audio mode
Connecting Bluetooth ® audio devices
Conditions
Bluetooth ® audio device
Bluetooth ® audio mode requires a
Bluetooth ® -capable audio device.
i Not all Bluetooth ® audio devices available
on the market are equally suitable. For
more detailed information on suitable
Bluetooth ® audio devices and on
connecting Bluetooth ® audio devices to
COMAND, visit
http://www.mbusa-mobile.com (for
USA). Alternatively, call the Mercedes-Benz
Customer Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
(for USA) or Customer Relations at
1-800-387-0100 (for Canada).
Before using Bluetooth ® audio mode, you
should check your Bluetooth ® audio device
for the following (see the Bluetooth ® audio
device's operating instructions):
R Bluetooth ® audio profile
The Bluetooth ® audio device must support
the A2DP and AVRCP Bluetooth ® audio
profiles.
R Bluetooth ® visibility
On certain Bluetooth ® audio devices, as
well as activating the Bluetooth ® function,
the device itself must also be made
"visible" to other devices (see the
Bluetooth ® audio device's operating
instructions).
R Bluetooth ® device name
This device name is predetermined but can
usually be changed. To make a clear
selection of the Bluetooth ® device
possible, Mercedes-Benz recommends
that you customize the device name (see
the Bluetooth ® audio device's operating
instructions).
i A2DP (Advanced Audio Distribution
Profile): Bluetooth ® audio profile for audio
data transmission
AVRCP (Audio Video Remote Control
Profile): Bluetooth ® audio profile for audio
data playback
X Activate Bluetooth ® and Bluetooth ®
visibility on the Bluetooth ® audio device.
On COMAND
X Activate the Bluetooth ® function in
COMAND (
Y
page 45).
General information
Before using your Bluetooth ® audio device
with COMAND for the first time, you will need
to authorize it.
When you authorize a new Bluetooth
® audio
device, it is connected automatically.
Connection involves first searching for a
172 Bluetooth ® audio mode
Audio