Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 117)

press W.
R pressing the 6 or ~ button and
using the telephone keypad on COMAND
R pressing the 6 or ~ button on the
multifunction steering wheel
R using the Voice Control (see the separate
Voice Control operating instructions)
Unless stated otherwise, the descriptions and
illustrations in this section refer to COMAND.
Function restrictions
The telephone is not ready for use in the
following situations:
R the telephone automatically tries to log on
to a network. If no network is available, you
may not be able to make a "911"
emergency call. If you attempt to make an
outgoing call, the No Service message will
appear for a short while.
911 emergency call
G WARNING
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.
The following requirements must be fulfilled
for a 911 emergency call:
R the mobile phone must be switched on.
R a network must be available.
R a valid and operational SIM card must be
inserted in the mobile phone.
R the mobile phone is connected to COMAND
via Bluetooth ® .
If you cannot make an emergency call, you
must arrange rescue measures yourself.
X Enter numbers on COMAND (
Y
page 121).
X Press the 6 button.
The telephone makes the connection.
X Wait for the emergency call center to
respond and then describe the emergency.
Telephony via the Bluetooth ®
interface
Conditions
On the mobile phone
For telephony via COMAND's Bluetooth ®
interface, a Bluetooth ® -capable mobile
phone is required.
i Not all mobile phones available on the
market are equally suitable. More detailed
information on suitable mobile phones and
on connecting Bluetooth ® -capable mobile
phones with COMAND can be found on the
Internet at
http://www.mbusa-mobile.com.
Alternatively, call the Mercedes-Benz
Customer Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
(for USA) or Customer Relations at
1-800-387-0100 (for Canada).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
In preparation for telephoning via the
Bluetooth ® interface, you should check the
following items on your mobile phone (see the
mobile phone operating instructions):
R Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
R Bluetooth ® visibility
On certain mobile phones, the device itself
must be made "visible" to other devices, as
well as activating the Bluetooth ® function
(see the mobile phone operating
instructions).
R Bluetooth ® device name
Every Bluetooth ® device has its own
Bluetooth ® device name. This device name
is freely definable, but can be identical for
all devices from the same manufacturer. It
is therefore recommended that you change
this name so that you can easily recognize
Telephony via the Bluetooth ® interface 115
Telephone
Z