Kontron AM4901 IPMI - Manual (Page 83)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 83
8.2.26 Get Fclock Options Parameter
This command gets the Fclock options parameters for six slots from the related NV-Parameters
and environmental options. An offset parameter of 0/>0 selects the first or second group of slots
(1...6 or 7...12).
Command LUN NetFn CMD
CmdGetFclockOptionsParameter (internal name) 00h OEM = 3Eh 38h
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
4 slotGroup (refer to command Set Fclock Options Parameter)
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB
5 slotGroup (refer to command Set Fclock Options Parameter)
6 fclockMode (refer to command Set Fclock Options Parameter)
7:8 reserved=0
9:20 Board manual fclock options (remoteSlotNumber, fClockStrategy) of 6 slots (refer to com-
mand Set Fclock Options Parameter).