Kontron AM4901 IPMI - Manual (Page 67)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 67
8.2.5 Set Permanent Power Parameter
This command writes the permanent power parameter to the related NV-Parameter and saves it.
8.2.6 Get Permanent Power Parameter
This command gets the permanent power parameter from the related NV-Parameter.
COMMAND LUN NetFn CMD
SetPermPwrParameter 00h OEM = 3Eh 26h
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
4:7 Permanent power parameter. LSB first.
Note: AMC Slot 1 = bit 5
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB
COMMAND LUN NetFn CMD
GetPermPwrParameter 00h OEM = 3Eh 27h
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB
5:8 Permanent power parameter. LSB first.
Note: AMC Slot 1 = bit 5