Kontron AM4901 IPMI - Manual (Page 69)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 69
8.2.9 Set Common Options Parameter
This command writes the common options parameter to the related NV-Parameter and saves it.
8.2.10 Get Common Options Parameter
This command gets the common options parameter from the related NV-Parameter.
COMMAND LUN NetFn CMD
SetCommonOptionsParameter 00h OEM = 3Eh 2Ah
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
4:7 Common options parameter. LSB first.
Note: AMC Slot 1 = bit 5
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB
COMMAND LUN NetFn CMD
GetCommonOptionsParameter 00h OEM = 3Eh 2Bh
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB
5:8 Common options parameter. LSB first.
Note: AMC Slot 1 = bit 5