Kontron AM4901 IPMI - Manual (Page 12)

IPMI Firmware User Guide AM5901/AM4901
Page 12 ID: 1035-8760, Rev. 3.0
1.2 Related Publications
The following publications contain information relating to this product.
1.3 Features Overview
The following listing is an overview of the basic functions supported by the AM5901/AM4901
IPMI Firmware.
• Fast start
• Supports 6 AMC modules
• Firmware upgradable in the field
• Command Line Interface (CLI) with IPMI support
• CLI operable before being activated by Hot Swap switch
• Ethernet Management Port has VLAN support
• Ethernet Management Port supports IPMI Over LAN (IOL)
• Ethernet Management Port supports Serial Over LAN (SOL) for the CLI
• Dynamic Sensor Data Repository
• Non-volatile System Event Log
• Non-volatile configuration parameters
• Automatic and/or manual configuration for adaption to various environments
• AMC module’s payload power can be activated permanently
• Activation, deactivation and power/current management
• Activation, deactivation and power/current parameters may be defined by the user inde-
pendent of back plane FRU data
• Supports FCLKA which is implemented on the backplane
• Supports Fclock e-keying
• Manual configuration/simulation of backplane, Fclock e-keying data may be defined by
the user
Table 2: Related Publications
PRODUCT PUBLICATION
IPMI IPMI Specification V1.5 Rev. 1.0; V2.0 Rev. 1.0
MicroTCA PICMG® MTCA.0 Micro Telecommunications Computing Architecture R1.0
AMC PICMG® AMC.0, Advanced Mezzanine Card Specification R2.0
PICMG® AMC.2, Gigabit Ethernet R1.0
AM5901 AM5901 User Guide, ID: 1032-0648, Rev. 1.0
AM4901 AM4901 User Guide, ID: 1022-5813, Rev. 1.0