Kontron AM4901 IPMI - Manual (Page 48)

IPMI Firmware User Guide AM5901/AM4901
Page 48 ID: 1035-8760, Rev. 3.0
6.2.1.3 Backplane Type OM6062 Short Recognized
The following is a list of the default Environmental Options for the OM6062 short:
locked = 0
fclockMode = 0
pwrChanPlus4IfIs1ForAmc1 = 0
shAddrDevice = 1
ps1EnDevice = 0
clkDevice = 1
pwrDevice = 1
fanDevice = 2
PCI Express is fully supported because the Fclock is supplied by the backplane. All AMC mod-
ules which require PCIe communications are expected to be an Fclock receiver requiring no
Fclock e-keying. If Fclock e-keying is required, then select fclock mode 'manu' and its param-
eters and refer to CLI command 'fclockopts' and chapter 3.5 E-keying.
6.2.1.4 Backplane Type ELMA K1 or K2 Recognized
The following is a list of the default Environmental Options for the OM6062 short:
locked = 0
fclockMode = 0
pwrChanPlus4IfIs1ForAmc1 = 0
shAddrDevice = 2
ps1EnDevice = 0
clkDevice = 1
pwrDevice = 1
fanDevice = 1
PCI Express is fully supported because the Fclock is supplied by the backplane. All AMC mod-
ules which require PCIe communications are expected to be an Fclock receiver requiring no
Fclock e-keying. If Fclock e-keying is required, then select fclock mode 'manu' and its param-
eters and refer to CLI command 'fclockopts' and chapter 3.5 E-keying.