Kontron AM4901 IPMI - Manual (Page 75)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 75
8.2.19 Set Priority Options Parameters
This command sets the priority parameters and the related common options parameters and
saves them to EEPROM.
Command LUN NetFn CMD
CmdSetSlotPriosParameter (internal name) 00h OEM = 3Eh 34h
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
4 prioMode (refer to common options)
0=AUTO: Use parameters from back plane FRU data “MicroTCA Carrier Activation and
Power Management record”
1=MANU: Use Slot priority parameters (refer to below)
2=OFF: No priorities used. Activation and deactivation sequence is random.
5:8 reserved=0
9:9+12 Slot priority parameter values of 12 slots. Beginning with slot 1.
Use every priority value 1 … e.g. 6 only once. Low number = high priority.
Priorities for not existing slots e.g. 7…12 are void but shall be unique as well.
Bit 7 set additionally = uncoordinated slot, not member of sequence.
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB