Kontron AM4901 IPMI - Manual (Page 79)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 79
8.2.23 Set Current Options Parameters
This command sets the current parameters (limits) and the related common options parame-
ters and saves them to EEPROM.
Command LUN NetFn CMD
CmdSetPwrMngConfigParameter (internal name) 00h OEM = 3Eh 38h
REQUEST DATA
Byte Data Field
1 Kontron IANA LSB
2 Kontron IANA byte 2
3 Kontron IANA MSB
4 pwrMngMode (refer to common options)
0=AUTO: Use parameters from back plane FRU data “MicroTCA Carrier Power Policy
record”
1=MANU: Use current options parameters (refer to below)
2=OFF: No current limits used.
5:6 maxCurrentOverride [100mA], LSB first.
Maximal current which the rack’s power supply is able to deliver.
7:8 reserved=0
9:9+12 Maximal allowed current consumption [100mA] for 12 slots. Beginning with slot 1. Values for
not existing slots e.g. 7…12 are void.
RESPONSE DATA
Byte Data Field
1 Completion Code
2 Kontron IANA LSB
3 Kontron IANA byte 2
4 Kontron IANA MSB