CDI Torque MULTITEST Government - Manual (Page 58)

4-10
Using the MULTITEST Toque Calbration System
Printing Statistical Analysis
1. Press STAT.
— The LED display reads:
**STAT**
— The LCD display reads:
HIT SEND = PRINT - upper line
= LIST STAT - lower line
2. Press SEND to print out the entire statistical analysis.
LED display reads:
SENDING
Refer to the sample printout in Figure 4-4. As
indicated on the LCD display, use MANUAL CLEAR
to cancel printing.
3. Press ENTER to return to measurements mode.
Figure 4-4: Sample Statistical Data Printout