CDI Torque MULTITEST Government - Manual (Page 25)

2-9
Functional Description and Specifications
MULTITEST Torque/Force Transducers
MULTITEST torque/force transducers provide industry standard
internal square drives. They feature a full bridge strain-gauge
@ 350 Ohms nominal. Full range output is 1500 µE, 9mV,
(3mV/V @ 3.0V excitation).
Torque/force transducers use a built-in EEPROM memory chip
that stores range identification and calibration factors.
Calibration of transducers is accomplished using precision
torque bars and certified weights. For additional information,
refer to Chapter 5—Calibration.
After a transducer is calibrated, it provides +/-0.5% system
accuracy with any MULTITEST Indicator. If the transducer and
indicator are calibrated together, the system accuracy increases
to +/-0.25%.
Transducer Dimensions/Transducer Indicator Torque Range
and Force Range
Calibration also results in a specified display resolution on the
MULTITEST Indicator. Display resolution is dependent on the
type of transducer being used. The following table shows
display resolutions for the specified transducer with the force
arm.
Torque Force
Stock No. Range Drive Range Height Diameter Weight
2000-5-02 15-200 in oz 1/4" Ext. 3.9 in 3.0 in 1.5 lb
2000-6-02 4-50 in lb 1/4" Ext. 3.9 in 3.0 in 1.5 lb
2000-65-02 15-150 in lb 1/4" Ext. 3.9 in 3.0 in 1.5 lb
2000-7-02 30-400 in lb 3/8" Ext. 33.3 lbf 4.1 in 3.0 in 3.0 lb
2000-8-02 80-1000 in lb 3/8" Ext. 83.3 lbf 4.1 in 3.0 in 3 lb
2000-10-02 10-125 ft lb 1/2" Ext. 125 lbf 4.25 in 4.0 in 5 lb
2000-11-02 20-250 ft lb 1/2" Ext. 250 lbf 4.25 in 4.0 in 5 lb
2000-12-02 60-600 ft lb 3/4" Ext. 600 lbf 4.25 in 4.0 in 5 lb
2000-13-02 100-1000 ft lb 1" Internal 1000 lbf 5.5 in 6.1 in 24 lb
2000-14-02 200-2000 ft lb 1" Internal 2000 lbf 5.5 in 6.1 in 24 lb
2000-400-02 4-50 in lb 1/4" Ext. H2.6-W5.0-L10.0 in 6 lb
(4-in-1) 30-400 in lb 3/8" Ext.
80-1000 in lb 3/8" Ext.
20-250 ft lb
1/2" Ext.