Sony SLV-R1000 - Manual (Page 59)

NOTES:
• If the other VCR has the LANC connector and the
CONTROL S OUT connector, use the LANC
connector. Do not make the LANC and CONTROL S
connections simultaneously.
• It other VCR has the REMOTE jack without
or C- ^®y ^0^ control other VCR from this VCR.
• You cannot perform synchronized editing on the
CCD-V8, V8AFU and EV-C8.
• If the tape recording condition of other VCR
(playback VCR) is bad, the output picture of this VCR
(recording VCR) may become a blue screen on the
TV screen for a moment. It is not an indication of
malfunction.
• When you record a stereo/bilingual tape source from
other VCR, set the audio output of other VCR so that
both the main and sub sounds are output.
• When connecting with camcorder such as the CCD-
TR101, CCD-TR200 and CCD-TR500, you can take
advantage of more precise synchronized editing.
When Using the CONTROL S Cable
Set the command mode of this VCR and the other video
equipment to the same position. If the other video equipment
has a synchronized edit function, use SYNCHRO EDIT on
the other equipment.
VCR (Thte VCR)
CONTROL S
cable s.
(not supplied)
UNE OUT
1 or 2
AUDIO
UNE OUT
1 or2
VIDEO
AudioA/ldeo connecting cable
(supplied)
AUDIO INinnVIDEO IN
' CONTROL S
V OUT
------------- -----------------^
Recording VCR
INPUT SELECT: Select external video or line
Other settings ; Set for recording
Advanced Operations
I 59