Sony SLV-R1000 - Manual (Page 38)

Timer Recording
4 Press ►.
Make sure that today’s
date is flashing. If it isn’t,
reset the clock to the
correct time. See "Setting
the Time and Date” (page
19).
TIMS? SET/CHECK 7M SUN
START STOP CH
. .. -i -.
i t . . . ; . . .
. / . . . . . . : , . . .
. .. . -
. / - . . . . . .
Press A or V to set the
month and date to “7/10
SAT".
The day of the week is
automatically set.
TIMER SET/CHECK 7/ 4 SUN
- START STOP CH
/--
I - -
I - •
/ --
/ -
.. SP
i ..
Press to flash the
hours position under
“START”, then press
a
or w until “9:~ PM"
appears.
TIMER SET/CHECK 7 1 4 SUN
DATE ^TOP CH
- SP
I ■ -
/ - -
I “
/ --
7 Press ► to flash the
minutes position under
“START”, then press *
or w until "00" appears.
TIMER SET.'CHECK 7/ 4 SUN
DATE ST^fT STOP CH
► 7; 103W r - SP
j-- ...........
8 Press ►.
The cursor blinks in the
time field under “STOP”.
Set the time to finish
recording, referring to
steps 6 and 7.
TIMER SET/CHECK 7, 4 SUN
DATE START STOP.
► 7/ lOssr a - SP
. 7.. . • • . .
. -
i ; , . - ^ • . «
Press ► to flash the “CH”
field, then press
a or v
until “26" appears.
Only the channels preset in
the VCR will appear. You
can also use the
CHANNEL + / - o r
channel number buttons.
When using a cable box,
the cable box channels
appear under "CH".
TIMER SET/CHECK 7/ 4 SUN
DATE S TART STOP QH^
► 7/ lOSAT 9: 00PU10 55PW 2MP
-/. . . . . . -
. / . . . . . .
. / . . . . . .
. / . - . . . V .
..t.-- -
. / V . 1 ] . - .
10 Press to flash the
recording speed
position, then * or V or
TAPE SPEED until “EP”
appears.
To change or correct a
setting before entering it.
press ◄ to return to the
item you wish to change.
TIMER SET/CHECK 7/ 4 S U N
DATE START STOP Ct\l
► 7/10S*r9 OO pu IO SSniilBferf-
. / . . - • . . .
-/.............................
11 Press >■ to store the
setting.
When all of the settings
stop flashing and a ►
appears in the leftmost
column, you’ve
completed the setting.
To preset another
program, press
a or • to
move the cursor to the next
line and repeat steps 4 to 11.
TIMER SET/CHECK 7/ 4 SUN
DATE START STOP CH
► 7/lOsW 9: OWMIO 5S p «28 EP
- / - • .... ...................................
..............
-/-....................... -
* / * r - ...........................
-I............
. / . . . . .
12 Press EXECUTE.
The message “Please push TIMER REC to set timer"
appears on the TV screen.
13 Press TIMER REC (ON/OFF).
The VCR enters the timer recording standby mode and
the TIMER REC (recording) indicator lights up on the
VCR.
When using a cable box, make sure to leave it on. If a
cassette is not loaded into the VCR, the TIMER REC
(recording) indicator will not light up on the VCR window,
but the timer program will be stored in the VCR.
To stop timer recording:
To stop timer recording while a program is being
recorded, press TIMER REC(ON/OFF).
NOTES:
• To change or correct the setting before completing it,
press ◄ to return to the item you wish to change.
• To record video sources from LINE IN 1.2 or 3 jacks,
press INPUT SELECT in any step from 4 to 11 to
move the screen cursor to LINE l, 2 or 3 in the "CH”
position.This cursor returns to channel number on the
fourth press.
• When CABLE BOX CONTROL is set to "ON", timer
recording cannot be done through LINE IN.
• If you don’t proceed for more than one minute, the
VCR automatically exits from TIMER SET/CHECK
menu.
38
Basic Op>eratlons