Sony SLV-R1000 - Manual (Page 11)

VCR Setup VCR Plus-f Channel Setup
1 Set the RF UNIT on the VCR’s rear panel to CH3 or
CH4.
If you made A/V connections, skip this step.
CH3 1
Bib
o
1a
io^e!
IBU |M
CH4 K -/ »ass'
Set to whichever channel is not used in your area.
If both are used, pick either channel.
Details are on page 62.
2 Set CABLE BOX CONTROL to OFF (this is the factory
setting) using the on-screen MENU.
3 Set NORMAL/CATV to CATV.
Press MENU. Select TUNER PRESET.
WEI«U MEHiU
► Tl*Ka3El CHECK T1MEBSETX>«0><
SET U> MENU SET UP MENU
TU»«RPBEBET ► TUNEP PRESET
SETvcaPiut. channels SET VCR Plus. CHANNELS
CABLE BOX CCM1ROL CABLE BOX CONTROL
CLOCK SET CLOCK SET
Set to CATV.
TUNER PRESET Igra
►NOflMAUCATV NORM»CATV
AUTO PRESET
MAMJAL8ET -ADO
ERASE
AFT .ON
eiNETUMNQ
OFF
Details are on pages 21 and 22.
4 Preprogram the channels into the VCR.
Press MENU, Select TUNER PRESET.
MENU MENU
►TlMenSET.'CHECK TWœRSETÆHECK
SET UP MENU BET UP MENU
► TUNER PRESET
SET VCR Plus. CHANNELS SET VCR Plu» CHANNELS
CABLE BOX control CABLE BOX CONTROL
ca.0CK3ET CLOCK SET
Select AUTO PRESET,
then press EXECUTE.
Details are on pages 21 and 22
TUNER PRESET .ÈËZ
MORMAL^CATV NORM^CATV
► AUTO PRESET
manual ær »ADO ERASE
ATT *ON
FINE tuning
OFF
1 Find the VCR Plus+ Channel Listing in your program
guide. For details, see page 44.
2 If the channels in the program guide are different
from the channels that you actually use on your TV,
set the channels that are different as follows:
Press MENU.
Select SET VCR Plus+
CHANNELS.
U£NU MENU
► TIMER SET/CHECK TTMER SET/CHECK
SET UP MENU SETIS-MENU
TUNER PFESET TUNER PRESET
SET VCR Pkn. CHANNELS ► SETVCRPIu» CHANNELS
CABLE BOX CONTROL CABLE BOX CONTROL
CLOCK SET CLOCK SET
Enter the program guide
channel, then the channel
your VCR uses._____
Program listing guide channel-
VCn Pu» OHA.NWL USr
OUlOE TV GUIDE TV
1 ra 59 47
s 4 № - 96-
IT »
M 9 -
A3 till _ ,
Your actual cable Channel-
Details are on page 45.
m
c/>
»
3.
To Watch the TV
1 Turn your VCR off, or press the VCR’s TV/VTR button
until the VTR indicator in the display window goes off.
2 Select the channel with your cable box (if you have one),
or directly tune with your TV (if you don’t).
To Watch the VCR
la If you didn’t use the A/V input:
• Turn ON the cable box.
• Select CH 3 or CH 4 on the cable box (whichever you
set on the back of the VCR).
• Select the output channel of the cable box (usually 2,3
or 4) on your TV.
1 b If you made the A/V connections on page 7:
Set your TV to the A/V input.
2 Insert a cassette and press ► PLAY.
Details are on page 30.
To Record a Program
1
2
3
Press VCR Plus+ on the Remote Commander.
Enter the program's PlusCode number.
Press ONCE. DAILY, or WEEKLY on the Remote
Commander.
4 Insert a blank cassette.
5 Press TIMER REC on the Remote Commander.
Details are on page 46.
Preparation 11