Sony SLV-R1000 - Manual (Page 18)

Preparing the Remote Commander/Seiecting Language
Controlling Other Sony Video Equipment If Other Sony
Video Equipment Has a COMMAND MODE Selector:
1 Set the Remote Commander COMMAND MODE 1/2/3
selector to a position other than the one you selected
for this VCR.
2 Set the COMMAND MODE selector of any other video
equipment to the same position you selected in
step 1.
If other Sony video equipment does not have a
COMMAND MODE selector, you can control other Sony
video equipment using the following COMMAND MODE
settings:
Infrared remote controlled Sony Betamax VCRs:
position 1
(Some may not be controlled in this mode.)
Sony 8 mm format VCRs: position 2
Sony VHS format VCRs: position 3
Manufacturers and their Code Numbers
Your Remote Commander is preprogrammed for use with a number of different TV sets. If your TV is listed in the table below, set
the appropriate manufacturer’s code prior to using the Remote Commander.
Manufacturer Code Number Manufacturer Code Number
SONY 1 Philco 3,4
Akai 4 Philips 8
AOC 4 Pioneer 16
Centurion 12 Portland 3
Coronado 3 Quasar 6
Curtis-Mathes 12 Radio Shack 5, 14
Daytron 12 RCA 4, 10
Fisher 11 Sampo 12
General Electric 6,10 Sanyo 11
Hitachi 2,3 Scott 12
J.C.Penney 4,12 Sears 7, 10. 11
JVC 9 Sylvania 8, 12
KMC 3 Teknika 3, 8, 14
Magnavox 3, 8, 12 Toshiba 7
Marantz 4,13 Wards 3,4, 12
MGA/Mitsubishi 4. 12, 13, 17 Yorx 12
NEC 4, 12 Zenith 15
Panasonic 6 Sharp 3. 5, 18
18
Preparation