Menu choices, Language (canadian versions only), Auto ant sel (automatic antenna selector) – Sony SLV-R1000 User Manual
Page 28: Auto stereo, Audio mix, Normal audio, Lanc mode, Line in 1 video, Line in 3 video, Auto display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the SET UP MENU
Menu Choices
LANGUAGE (Canadian versions only)
You can preset your VCR to display screen information in
either English or French.
AUTO ANT SEL (Automatic Antenna Selector)
• If your TV is connected only to VHF/UHF OUT on the
VCR, set to "ON".
When playing back a cassette, the picture is automatically
displayed on the screen simply by selecting the channel for
the VCR on the TV. To watch TV programs selected on the
TV, press TV/VTR to turn off the VTR indicator in the display
window.
• If your TV is connected to both VHF/UHF OUT and LINE
OUT on the VCR, set to "OFF".
When playing back a cassette, select the input for the VCR
on the TV.
T
0
watch TV programs selected on the TV, select the tuner
input.
AUTO STEREO
If a stereo program's reception is poor, set to “OFF". The
program is recorded in monaural but sound quality may
improve. For details, see page 36.
AUDIO MIX
To listen to sound recorded on both the Hi-Fi video track and
the normal audio track of the audio tape, set to "ON". For
details, see page 33.
NORMAL AUDIO
When there is a SAP (Second Audio Program) broadcast,
select "SAP" to record the SAP sound on the normal audio
track. For details, see page 33.
LANC MODE
If you want to control another VCR with the control L
connector, set to “M" (Master). If you want the VCR
controlled by another VCR or editing controller, set to "S"
(Slave). (For details, see page 58.)
LINE IN 1 VIDEO
When you connect the video output jack of the other VCR to
the LINE IN 1 VIDEO input jack of this VCR, select "STD".
When you connect the S VIDEO output connector of the
other VCR to the LINE IN 1 S VIDEO input connector of this
VCR, select "S".
LINE IN 3 VIDEO
When you connect the video output jack of the other VCR to
the LINE IN 3 VIDEO input jack of this VCR, select “STD”.
When you connect the S VIDEO output connector of the
other VCR to the LINE IN 3 S VIDEO input connector of this
VCR, select “S".
AUTO DISPLAY
Normally select “ON". In this case, the on-screen display will
appear on the TV screen for about five seconds each time
the operation mode of the VCR is changed.
Select "OFF" when you want to play back on this VCR and
record on the other VCR. This eliminates the on-screen
display so that it will not appear on the TV screen.
NOTE:
The VCR automatically exits from the main MENU and
SET UP MENU if you don’t proceed for more than one
minute.
28
Preparation