Recording programs using vcr plus, Note, 1 press vcr plus – Sony SLV-R1000 User Manual

Page 46: 4 press once, daily, or weekly on the remote, 6 insert a cassette into your vcr, Introducing vcr plus

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Introducing VCR Plus+

Recording Programs Using VCR Plus+

To use VCR Plus+ to record programs, all you need is the

program’s PlusCode, which you’ll find in the program listings
in your local newspaper, cable TV guide, or TV Guide
magazine.
For example, to record the following program, just use the
following procedures;

PlusCode

EXAMPLE: Q] MOVIE—Comedy (2hrs). [532921

NOTE:

• You can set the program without opening the VCR

PIUS+ menu. Refer to the display window on the

VCR.

• When you use a cable box, use Hookup 2 and set the

CABLE BOX CONTROL (See “Setting the CABLE
BOX CONTROL" on page 25). Turn the cable box
on.

Press VCR Plus+.

The VCR PIUS+ TIMER
SET menu appears.

Enter 53292 (the
program’s PlusCode) in

the PlusCode field.

If you make a mistake,
press TIMER CLEAR and

enter the PlusCode again.

VCR Plus*

PlusCode

TAPE SPEED

[53292—1

ISP)

To select the cassette’s
recording speed (SP or
EP), press TAPE SPEED.

Unless you change the

cassette speed, SP is used.
See “Maximum recording
time of a cassette” on
page 29 for information
about cassette speeds.

VCR Plus*

PlusCode

TAPE SPEED

[53292-1

[SP]

Press ONCE, DAILY, or WEEKLY on the Remote

Commander.

See the following chart for details of these options.

ONCE:

Records scheduled programs one time
only.

WEEKLY:

Records every week at the same
scheduled time.

DAILY M-F:

Records Monday to Friday at the same
scheduled time.

The VCR Plus+ menu
displays the recording
information: date, program
start and stop times,
channel number, and tape
speed.
If you make a mistake,
press TIMER CLEAR, and
start from the beginning.

VCR Plus*

PiusCod*

TAPE

SPEED

[53292-J

[SP]

RECORDING TIME

DATE START STOP CH

10/26M0N

8.00

52 8P

If you want to set another program, repeat steps

1 to 4.

6 Insert a cassette into your VCR.

Press TIMER REC (ON/OFF) to set the VCR’s
recording timer.

The VCR enters the timer recording standby mode.
Your VCR is now set up to record the programs you’ve
selected. The VCR will turn on automatically, record the
program, and then turn off until the next programmed
show is ready for broadcast.

For checking, changing, cancelling the settings, see

pages 41 and 42.

Basic Operations