Sony SLV-R1000 - Manual (Page 57)

Editing onto Another VCR
Here's how to use this VCR as the playback VCR and
another VCR as the recording VCR. Before you start:
• Press EDIT to light the EDIT indicator in the display
window.
If your recording VCR has an editing function, it should
also be selected to improve reception.
• Select AUTO DISPLAY OFF in the SET UP MENU screen
and press DISPLAY several times until the on-screen
display disappear from the TV screen.
How to edit:
1 Turn on the recording VCR and insert a blank
cassette with a safety tab in place.
2 Insert a source cassette into the playback VCR.
3 Locate the playback start point and select the
playback pause mode on the playback VCR.
4 Locate the recording start point and select the
recording pause mode on the recording VCR.
5 Press II PAUSE on both VCRs.
For best results, press II PAUSE on the playback VCR
just before pressing II PAUSE on the recording VCR.
When you’ve finished editing, press ■ STOP on both
VCRs.
NOTES:
• If your recording VCR is a stereo unit, make
connections with the supplied audio/video connecting
cable.
• If your recording VCR is a monaural unit, make
connections using the VMC-910HG/920HG cable (not
supplied).
• When connecting the VCRs, do not connect both
LINE IN and LINE OUT jacks on your VCRs
simultaneously. Doing so may cause a humming
noise.
• If the EDIT button inside the drop-down panel is set to
"ON" during playback, the APC function does not
operate.
• If your recording VCR is equipped with the S VIDEO
INPUT connector, you can use the supplied S VIDEO
connecting cable to connect to the S VIDEO OUT
connector on the VCR.
Advanced Operations
57