Sony SLV-R1000 - Manual (Page 17)

Selecting Language (Only for Canadian version)
You can set your VCR to display screen information in either
English or French.
1 Press MENU
The main MENU appears.
MENU
► TIMER SET/CHECK
SET UP MENU
TU№R PRESET
SET VCR Plusf CHANNELS
CABLE BOX CONTROL
CLOCK SET
2 Press A or V to move the cursor to SET UP MENU.
MENU
TIMER SET/CHECK
► SET UP MENU
TUNER PRESET
SET VCR Plus* CHANNELS
CABLE BOX CONTROL
CLOCK SET
Press EXECUTE.
The SET UP MENU screen appears.
SET UP MENU
►LANGUAGE iENGUSH fflENCH
AUTO ANT SEL • ON OFF
AUTO STEREO •ON OFF
AUDIO MIX ON "OFF
NORMAL AUDIO" MAIN SAP
LANCMOOE M *S
LINE IN I VIDEO • STD S
LINE IN 3 VIDEO •STD S
AUTO DISPLAY • ON OFF
4 Press -4 or ► to select “ENGLISH” or “FRENCH”.
SET UP MENU
HANQUAGE iENGUSH FREfCH
SÉL AUTO ANT «OUI NON
STÉRÉO
AUTO «OUI NON
MÉLANGE AUDIO OUI »NON
AUDIO NORMAL »PHIN SAP
MODE
UNC M *S
ENTREE VIDEO 1 »STD S
ENTREE VIDEOS «STD S
AFFICHAGE AUTO* OUI NON
5 Press EXECUTE.
Setting the Remote Commander to Control
Other Manufacturers’ TV Sets
The following steps show you how to use your Remote
Commander to set the appropriate manufacturer’s code
number for a non-Sony TV. (Code numbers are listed on the
next page.)
1 Set the ITVI / lYtRl remote control selector to
“frvl".
2 While pressing the EXECUTE button, press the
manufacturer’s code number and the ENTER
button.
You can now use the POWER, VOL h -/-, CHANNEL
+/- and the TV/VTR buttons on your Remote
Commander to operate the TV.
NOTES:
• The TV/VTR button may not function, depending on
the manufacturer. If this problem occurs, use your
TV’s remote control unit.
• If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
• If you enter a new code number, the code number
previously entered will be erased.
• If you release the EXECUTE button before pressing
the ENTER button, the setting will be cancelled.
• Some manufacturers may use a different remote
control system from the one programmed to work with
your VCR. If this is the case, and you are unable to
operate the TV with your Remote Commander, use
the TV’s remote control unit instead.
• When you replace the batteries in the Remote
Commander, the code number automatically resets to
1 (SONY). Reset the appropriate code number, if
necessary.
“O
“1
CB
X3
DI
CD
CD
e
3
3
0»
GO
Preparation 17