Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 42)

19. Click Start Restore.
20. When a message warns that the system restore will overwrite the current system state, click OK.
21. Click OK in the Confirm Restore window.
22. Restart the NAS system after the restore process completes.
Restoring Initial System Setup
After the operating system is reinstalled on the system, the NAS system is set back to factory defaults. Make sure you configure the system again to establish
network communication. For information about configuring your system, see "
Initial Configuration ."
Back to Contents Page
NOTE: If your backup file is in a different location, click Browse and navigate to the file.
NOTE: Windows must replace all locked files on the system; therefore, the process of restarting the system might take approximately 15 minutes
to complete.
NOTE: If you used the multilanguage user interface before reinstalling the operating system, you must reinstall it. See " Installing Multilanguage User
Interface (MUI) Support ."