Dell Precision 330 - Manual (Page 88)

88 Installing Upgrades
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m 6 Align the screw holes of the drive and bracket, and secure the drive in
the bracket using the screws that came with the upgrade kit (see the
following figure).
I n s t a l l i n g a H a r d D r i v e i n t h e B r a c k e t ( D e s k t o p C h a s s i s )
NOTE: Orient the drive in the bracket so that its bottom will face the left
side of the chassis when the bracket is installed in the chassis.
7 Reinstall the hard-drive bracket in the chassis (see the following
figure).
Insert the bracket into the chassis by inserting the hooks in the slots on
the front of the chassis. Then lower the bracket to the bottom of the
chassis, making sure that the latch on the externally accessible drive
screws (4)
drive
drive bracket