Dell Precision 330 - Manual (Page 33)

Advanced Features 33
NOTE: You must restart the computer before Network Interface Controller
option settings will take effect.
Integrated Devices
You computer has several integrated devices. For these devices to be
accessible to the operating system, the corresponding options in
system
setup must be configured properly.
To enable or disable an integrated device, enter system setup, select
Integrated Devices, and change the setting for the appropriate device to On
or Off:
• Sound
• PS/2 mouse
• Universal Serial Bus (USB)
N e t w o r k O p t i o n S e t t i n g s
Network Interface
Controller Boot Sequence Remote Wake Up Function
Off MBA is not available Not available • The computer attempts to boot from the devices
specified in the Boot Sequence .
• The computer cannot be remotely started.
On MBA is not available Available • The computer attempts to boot from the devices
specified in the Boot Sequence .
• The computer can be remotely started by WOL
and/or WOR.
On w/ MBA MBA is set as first
boot device
Available • The computer prompts you to press
during start-up, allowing
you to select a network boot method.
• The computer can be remotely started by WOL
and/or WOR.