Dell Precision 330 - Manual (Page 84)

84 Installing Upgrades
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m a If you are installing an EIDE device, ensure that the IDE interface
cable is properly connected to the EIDE connector on the system
board. For more information, see " EIDE Device Installation
Guidelines ."
b If you are installing a SCSI device, ensure that the SCSI interface
cable is properly connected to the interface connector on the SCSI
controller board. For more information, see " SCSI Device
Installation Guidelines ."
10 Connect a DC power cable to the power input connector on the back
of the drive (see the following figure).