Dell OptiPlex 360 (Late 2008) - Manual (Page 89)

Memory Modules 89
8
Memory Modules
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing a Memory Module
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19 or "Removing the Desktop Computer Cover" on
page 21).
3 Locate the memory modules on the system board (see "System Board
Components" on page 13).
4 Press the securing clip at each end of the memory module connector.
5 Grasp the module by its edges and pull it upwards.
If the module is difficult to remove, gently ease the module back and forth
to remove it from the connector.
1 securing clip 2 memory module connector
1
2