Dell OptiPlex 360 (Late 2008) - Manual (Page 66)

66 Drives
5 Follow the procedure in "After Working on Your Computer" on page 17.
6 Enable the new floppy drive or media card reader in the system setup
program. For information on using the system setup program, see the Dell
Technology Guide on your computer or at support.dell.com.
7 Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 136).
Removing a Floppy Drive or Media Card Reader From the Desktop
Computer
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
NOTE: Since the following steps do not require the complete removal of the
optical drive, it is not necessary to disconnect the cables connected to the
optical drive.
1 data cable 2 power cable
3 floppy drive connector (DSKT)
1
2
3