4 remove the filler bracket (if applicable), Computer – Dell OptiPlex 360 (Late 2008) User Manual

Page 47

Cards

NOTE:

Installing filler brackets in empty card-slot openings is necessary to

maintain FCC certification of the computer. The brackets also keep dust and

dirt out of your computer and maintain the airflow that cools your computer.

7 Before you close the card retention mechanism, ensure that:

• The tops of all cards and filler brackets are flush with the alignment

guide.

• The notch in the top of the card or filler bracket fits around the

alignment guide.

8 Secure any remaining card(s) by closing the card retention latch and

snapping it into place.

Installing or Replacing a PS/2 Serial-Port Adapter in a Desktop

Computer

NOTE:

NOTE:

If you are replacing a card, uninstall the driver for the existing card. For

instructions, see the documentation that came with the card.

3 Gently lift the release lever on the card retention latch to pivot the latch

open. The latch remains in the open position.

4 Remove the filler bracket (if applicable).

NOTE:

For information on configuring the adapter, making internal

connections, or customizing it for your computer, see the documentation that

came with the adapter.