Dell OptiPlex 360 (Late 2008) - Manual (Page 30)

30 Cards
• If you are installing a card, ensure that the appropriate driver for the card is
also installed. For instructions, see the documentation that came with the
card.
Removing a PCI or PCI Express Card From a Mini Tower Computer
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
3 Gently push the release lever on the card retention latch to pivot the latch
open. The latch remains in the open position.
4 If necessary, disconnect any cables connected to the card.
5 If you are removing the card permanently:
a Install a filler bracket in the empty card-slot opening.
1 alignment guides (4) 2 card
3 release lever 4 card slots (4)
5 card retention latch
1
2
3
4
5