Dell OptiPlex 360 (Late 2008) - Manual (Page 50)

50 Cards
Removing a Card From the Optional Riser-Card
Cage
NOTE: The riser-card cage is an option for the desktop computer only.
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Desktop Computer
Cover" on page 21).
3 Remove the riser-card cage:
a Check any cables connected to cards through the back panel openings.
b Rotate the riser-card cage handle up and gently pull on the handle and
lift the riser-card cage up and away from the computer.
4 Gently push the release lever on the card retention latch to pivot the latch
open. The latch remains in the open position.
5 Disconnect any card cables from the system board (see "Desktop
Computer System Board Components" on page 15).
6 Grasp the card by its top corners, and ease it out of its connector.
1 riser-card cage 2 handle
3 riser cards (2)
1
2
3