Dell OptiPlex 360 (Late 2008) - Manual (Page 40)

40 Cards
CAUTION: Do not route card cables over or behind the cards. Cables routed over
the cards can prevent the computer cover from closing properly or cause damage
to the equipment.
9 Connect any cables that should be attached to the card.
10 Follow the procedure in "After Working on Your Computer" on page 17.
11 IIf you installed a network adapter card and want to turn off the integrated
network adapter, use the system setup program. For more information on
using the system setup program, see the Dell Technology Guide on your
computer or at support.dell.com.
CAUTION: If your computer supports Active Management Technology (AMT),
disabling the integrated network adapter also disables AMT functionality.
12 Install any drivers required for the card as described in the card
documentation.
1 release lever 2 card retention latch
3 card 4 card-edge connector
5 card connector
2
3
1
4
5