Dell OptiPlex 360 (Late 2008) - Manual (Page 25)

Drive Bezel 25
3
Drive Bezel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTE: This procedure applies only to the mini tower computer. The desktop
computer does not have a removable bezel.
Removing the Drive Bezel
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
3 Locate the blue latch inside the chassis beside the drive bezel along the
right edge of the computer. Slide the latch downward and hold it in place.
4 Gently disengage the bezel from the right side, and then release the latch.
1
2