Dell Inspiron 3700 - Manual (Page 133)

Back to Contents Page
System Setup Program : Dell™ Inspiron™ 3700 System Reference
Overview
Each time you turn on your computer, it compares the installed hardware with the system configuration information stored in nonvolatile random-
access memory (NVRAM). If the system detects a discrepancy, it generates an error message for each incorrect configuration setting. You can
use the System Setup program to adjust the configuration settings.
You can use the System Setup program as follows:
l To set or change user-selectable features —for example, your password or power management features
l To verify information about your computer's current configuration, such as the amount of system memory
For some setup options, you must reboot the computer before any changes take effect. Changes for other options take effect immediately.
After you set up your computer, run the System Setup program to familiarize yourself with your system configuration information and optional
settings. Dell recommends that you write down the information for future reference.
Entering the System Setup Program
Enter and use the System Setup program as follows:
Press at any time on the keyboard (or on an external keyboard if the External Hot Key option is enabled). If you
press (or on an external keyboard if the External Hot Key option is enabled), the System Setup program opens
directly to the Battery Status screen.
Press to exit the System Setup program. If you change the setting of an option that requires rebooting to take effect, exit the operating
system before rebooting. (The Help text in the upper-right corner of System Setup screens 1, 2, and 4 tells you if the computer must be rebooted.)
To enter System Setup on a system running ACPI, you must enter System Setup before the operating system loads. Enter System Setup by
pressing or when the F2 message appears during the System Power On startup process.
Using the System Setup Program
The System Setup screens display the current setup and configuration information and optional settings for your computer. Information on the
screens is organized in five boxed areas:
l Title
The box at the top of all screens lists the page number, system name, and version number of the basic input/output system (BIOS).
Overview Page 2 Options
Entering the System Setup Program Page 3 Options
Using the System Setup Program Page 4 Options
Page 1 Options
NOTE: If you change an option that is activated by rebooting, the System Setup program displays the setting you
selected rather than the setting currently in effect. You must reboot for the new setting to take effect.
NOTE: If the computer uses the Microsoft® Windows NT® 4.0 or Windows® 98 operating system, you must use the
System Setup program to view and change your system configuration.
NOTE: Certain key combinations may not function with the Advanced Configuration and Power Interface (ACPI) or may
require activation with the Power Management Properties window in the Control Panel. See
Power Conservation .
NOTE: If the System Setup program is running when the computer enters standby mode, the computer exits the System
Setup program and then activates standby mode.