User’s guide, Mete red rac k pdu – Dell Metered PDU LED User Manual
Page 92
USER’S GUIDE
Mete
red Rac
k
PDU
89
ssl
certificate
Add, replace, or remove a security certificate.
Status
:
•
Not installed
: A certificate is not installed, or was installed by FTP or SCP to an
incorrect location. Using
Add or Replace Certificate File
installs the certificate to
the correct location,
/ssl
on the Rack PDU.
•
Generating
: The Rack PDU is generating a certificate because no valid certificate
was found.
•
Loading
: A certificate is being activated on the Rack PDU.
•
Valid certificate
: A valid certificate was installed or was generated by the Rack
PDU. Click on this link to view the contents of the certificate.
If you install an invalid certificate, or if no certificate is loaded when you
enable SSL, the Management Card generates a default certificate, a process
which delays access to the interface for up to one minute.
You can use the
default certificate for basic encryption-based security, but a security alert message
displays whenever you log on.
Add or Replace Certificate File
: Enter or browse to the certificate file created with
the Security Wizard.
See “Creating and Installing Digital Certificates” in
to choose a method for using digital certificates created by the Security Wizard or
generated by the Rack PDU.
Remove
: Delete the current certificate.
Option
Description