Dell Metered PDU LED - Manual (Page 36)

USER’S GUIDE
Mete
red Rac
k
PDU
33
radius
Access: Administrator only
Description: View the existing RADIUS settings, enable or disable RADIUS
authentication, and configure basic authentication parameters for up to two RADIUS
servers.
For a summary of RADIUS server configuration and a list of
supported RADIUS servers, see
Configuring the RADIUS Server .
Additional authentication parameters for RADIUS servers are
available at the Web interface of the Rack PDU. See
RADIUS for
more information.
For detailed information about configuring your RADIUS server,
see
Appendix B: Security Handbook .
Option Argument Description
-a local |
radiusLocal |
radius Configure RADIUS authentication:
local —RADIUS is disabled. Local authentication is enabled.
radiusLocal —RADIUS, then Local Authentication.
RADIUS and local authentication are enabled. Authentication
is requested from the RADIUS server first. If the RADIUS
server fails to respond, local authentication is used.
radius —RADIUS is enabled. Local authentication is
disabled.
-p1
-p2 The server name or IP address of the primary or secondary
RADIUS server.
N OTE : RADIUS servers use port 1812 by default to
authenticate users. To use a different port, add a colon
followed by the new port number to the end of the RADIUS
server name or IP address.