Dell Metered PDU LED - Manual (Page 18)

USER’S GUIDE
Mete
red Rac
k
PDU
15
1 . From a computer on the same network as the Rack PDU, at a command prompt,
type telnet and the IP address for the Rack PDU (for example, telnet
139.225.6.133 , when the Rack PDU uses the default Telnet port of 23), and
press E NTER .
If the Rack PDU uses a non-default port number (from 5000 to 32768), you must
include a colon or a space, depending on your Telnet client, between the IP address
(or DNS name) and the port number.
2 . Enter the user name and password (by default, admin and admin for an
Administrator, or device and device for a Device User).
SSH for high-security access. If you use the high security of SSL for the Web
interface, use SSH for access to the command line interface. SSH encrypts user
names, passwords, and transmitted data. The interface, user accounts, and user
access rights are the same whether you access the command line interface through
SSH or Telnet, but to use SSH, you must first configure SSH and have an SSH client
program installed on your computer.
If you cannot remember your user name or password, s ee
Recovering from a Lost Password .