Dell Metered PDU LED - Manual (Page 81)

USER’S GUIDE
Mete
red Rac
k
PDU
78
RADIUS
Path: Administration > Security > Remote Users > RADIUS
Use this option to do the following:
• List the RADIUS servers (a maximum of two) available to the Rack PDU and the
time-out period for each.
• Click Add Server , and configure the parameters for authentication by a new RADIUS
server.
• Click a listed RADIUS server to display and modify its parameters.
RADIUS Setting Definition
RADIUS Server The server name or IP address of the RADIUS server.
N OTE : RADIUS servers use port 1812 by default to authenticate users.
To use a different port, add a colon followed by the new port number to
the end of the RADIUS server name or IP address.
Secret The shared secret between the RADIUS server and the Rack PDU.
Timeout The time in seconds that the Rack PDU waits for a response from the
RADIUS server.
Test Settings Enter the Administrator user name and password to test the RADIUS
server path that you have configured.
Skip Test and Apply Do not test the RADIUS server path.
Switch Server
Priority Change which RADIUS server will authenticate users if two configured
servers are listed and
RADIUS, then Local Authentication or
RADIUS Only is the enabled authentication method.