User’s guide, Mete red rac k pdu – Dell Metered PDU LED User Manual
Page 110
USER’S GUIDE
Mete
red Rac
k
PDU
107
Syslog settings.
Path: Logs > Syslog > settings
Setting
Definition
Message
Generation
Enables (by default) or disables the Syslog feature.
Facility
Code
Selects the facility code assigned to the Rack PDU’s Syslog messages (
User
, by
default).
N
OTE
: User
best defines the Syslog messages sent by the Rack PDU.
Do not
change this selection unless advised to do so by the Syslog network or system
administrator.
Severity
Mapping
Maps each severity level of Rack PDU or Environment events to available Syslog
priorities. You should not need to change the mappings.
The following definitions are from RFC3164:
•
Emergency
: The system is unusable
•
Alert
: Action must be taken immediately
•
Critical
: Critical conditions
•
Error
: Error conditions
•
Warning
: Warning conditions
•
Notice
: Normal but significant conditions
•
Informational
: Informational messages
•
Debug
: Debug-level messages
Following are the default settings for the
Local Priority
settings:
•
Severe
is mapped to
Critical
•
Warning
is mapped to
Warning
•
Informational
is mapped to
Info
N
OTE
:
To disable Syslog messages, see
.