Dell Metered PDU LED - Manual (Page 74)

USER’S GUIDE
Mete
red Rac
k
PDU
71
Data log
Path: Logs > Data > options
The data log records the current and power for the device and phases (for a 3-phase
Rack PDU), as applicable, as well as temperature and humidity and dry contact data at
the specified time interval. Each entry is listed by the date and time the data was
recorded.
To display the data log (Logs > Data > log):
• By default, view the data log as a page of the Web interface. The most recent data
item is recorded on page 1. From the navigation menu below the log:
– Click a page number to open a specific page of the log.
– Click Previous or Next to view the data recorded immediately before or after the
data that is listed on the open page.
– Click << to return to the first page of the log, or click >> to view the last page of the
log.
• To see the listed data on one page, click Launch Log in New Window from the data
log page to display a full-screen view of the log.
To filter the log by date or time (Logs > Data > log):
To display the entire data log or to change the number of days or weeks for which the
log displays the most recent events, select
Last . Select a time range from the drop-
down menu, then click Apply . The filter configuration is saved until the device restarts.
In your browser's options, JavaScript must be enabled for you to use the
Launch Log in New Window button.
Alternatively, you can use FTP or SCP to view the data log. See How to use
FTP or SCP to retrieve log files .