beautypg.com

Local access to the command line interface, User’s guide, Mete red rac k pdu – Dell Metered PDU LED User Manual

Page 19

background image

USER’S GUIDE

Mete

red Rac

k

PDU

16

Local access to the command line interface

For local access, use a computer that connects to the Rack PDU through the serial port
to access the command line interface:

1 . Select a serial port at the computer and disable any service that uses that port.

2 . Connect the supplied serial cable from the selected serial port on the computer to

the serial port on the Rack PDU.

3 . Run a terminal program (e.g., HyperTerminal) and configure the selected port for

9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.

4 . Press

E

NTER

, and at the prompts, enter your user name and password.

See also other documents in the category Dell Computer hardware: