Dell Metered PDU LED - Manual (Page 33)

USER’S GUIDE
Mete
red Rac
k
PDU
30
FTP
Access: Administrator only
Description: Enable or disable access to the FTP server. Optionally, change the port
setting to the number of any unused port from 5001 to 32768 for added security.
Example: To change the TCP/IP port to 5001, type:
ftp -p 5001
help
Access: Administrator, Device User
Description: View a list of all the CLI commands available to your account type. To
view help text for a specific command, type the command followed by the help
command: user help
Example 1: To view a list of commands available to a Device User, type:
help
Example 2: To view a list of options that are accepted by the alarmcount command,
type:
alarmcount ?
Option Argument Definition
-p number> Define the TCP/IP port that the FTP server uses to
communicate with the Rack PDU (21 by default). The FTP
server uses both the specified port and the port one number
lower than the specified port.
-S enable |
disable Configure access to the FTP server.