Dell Metered PDU LED - Manual (Page 34)

USER’S GUIDE
Mete
red Rac
k
PDU
31
ping
Access: Administrator, Device User
Description. Determine whether the device with the IP address or DNS name you
specify is connected to the network. Four inquiries are sent to the address.
Example: To determine whether a device with an IP address of 150.250.6.10 is
connected to the network, type:
ping 150.250.6.10
portSpeed
Access: Administrator
Description:
Example: To configure the TCP/IP port to communicate using 100 Mbps with
half-duplex communication (communication in only one direction at a time), type:
portspeed -s 100H
Argument Description
name> Type an IP address with the format xxx.xxx.xxx.xxx, or the DNS
name configured by the DNS server.
Option Arguments Description
-s auto | 10H |
10F | 100H |
100 F Define the communication speed of the Ethernet port. The
auto
command enables the Ethernet devices to negotiate to
transmit at the highest possible speed. See Port Speed for
more information about the port speed settings.