Dell Metered PDU LED - Manual (Page 160)

USER’S GUIDE
Mete
red Rac
k
PDU
157
Load the host key to the Rack PDU.
1. On the Administration tab, select Network on the top menu bar, and ssh host
key under the Console heading on the left navigation menu.
2. Select Add or Replace Host Key , and browse to the host key, the .p15 file you
created in the procedure Create the host key . (The default location is
C:\Program Files\Dell\Rack PDU Security Wizard .)
3. At the bottom of the User Host Key page, note the SSH fingerprint. Log on to
the Rack PDU through your SSH client program, and verify that the correct host
key was uploaded by verifying that these fingerprints match the fingerprints that
the client program displays.
Alternatively, you can use FTP or Secure CoPy (SCP) to transfer the host key
file to the Rack PDU. For SCP, the following command would transfer a host
key named
hostkey.p15 to a Rack PDU with an IP address of 156.205.6.185:
scp hostkey.p15 [email protected]