Dell Metered PDU LED - Manual (Page 67)

USER’S GUIDE
Mete
red Rac
k
PDU
64
Configuring the Name and Location of the Rack
PDU
Path: Device Manager > Load Management > Device Load
The name and location you enter appear on the Home tab.
1 . Click the Device Manager tab, then device load from the Load Management
menu.
2 . Enter a name and location.
3 . Click Apply .
Resetting Peak Load and kWh
Path: Device Manager > Device Load
1 . Click the Device Manager tab, then device load from the Load Management
menu.
2 . Click the Peak Load and Kilowatt-Hours check boxes as desired.
3 . Click Apply .
You can set the Name and Location through either the Device
Manager tab or the Administration tab. A change in one affects the
other.