Dell Metered PDU LED - Manual (Page 107)

USER’S GUIDE
Mete
red Rac
k
PDU
104
SNMP traps
Trap Receivers.
Path: Administration > Notification > SNMP Traps > trap receivers
View trap receivers by NMS IP/Host Name. You can configure up to six trap receivers.
• To configure a new trap receiver, click Add Trap Receiver .
• To modify or delete a trap receiver, first click its IP address or host name to access its
settings. (If you delete a trap receiver, all notification settings configured under Event
Actions for the deleted trap receiver are set to their default values.)
• To specify the trap type for a trap receiver, select either the SNMPv1 or SNMPv3
radio button. For an NMS to receive both types of traps, you must configure two trap
receivers for that NMS, one for each trap type.
Item Definition
Trap Generation Enable (the default) or disable trap generation for this trap receiver.
NMS IP/Host
Name The IP address or host name of this trap receiver. The default, 0.0.0.0,
leaves the trap receiver undefined.