Dell Metered PDU LED - Manual (Page 75)

USER’S GUIDE
Mete
red Rac
k
PDU
72
To display data logged during a specific time range, select From . Specify the beginning
and ending times (using the 24-hour clock format) and dates for which to display data,
then click
Apply . The filter configuration is saved until the device restarts.
To delete the data log:
To delete all data recorded in the log, click Clear Data Log on the Web page that
displays the log. Deleted data cannot be retrieved.
To set the data collection interval (Logs > Data > interval):
Define, in the Log Interval setting, how frequently data is sampled and stored in the
data log, and view the calculation of how many days of data the log can store, based on
the interval you selected. When the log is full, the older entries are deleted. To avoid
automatic deletion of older data, enable and configure data log rotation, described in
the next section.
To configure data log rotation (Logs > Data > rotation):
Set up a password-protected data log repository on a specified FTP server. Enabling
rotation causes the contents of the data log to be appended to the file you specify by
name and location. Updates to this file occur at the upload interval you specify.
Parameter Description
Data Log Rotation Enable or disable (the default) data log rotation.
FTP Server Address The location of the FTP server where the data repository file is stored.
User Name The user name required to send data to the repository file. This user
must also be configured to have read and write access to the data
repository file and the directory (folder) in which it is stored.
Password The password required to send data to the repository file.
File Path The path to the repository file.
Filename The name of the repository file (an ASCII text file).