Canon PIXMA MP830 User Manual
Page 63
Chapter 3
61
Printing from a Memory Card
(2) Use [
] to enlarge or [
] to reduce the cropping frame size, respectively.
(3) Use [
] or [
] to switch the cropping frame between portrait and landscape.
4
Finalize your selection of trimming area.
(1) Press [OK].
The area to be cropped is specified, and the original photo is displayed.
Printing Several Photos on a Single Sheet of Paper (Layout print)
You can print the specified photos in the specified layout.
1
Prepare for printing.
See
“Prepare for printing.” on page 56
.
2
Select the print menu.
(1) Press [MEMORY CARD].
(2) Use [
] or [
] to select
(3) Use [
] or [
] to select
3
Specify the layout.
(1) Use [
] or [
] to select the layout, then press [OK].
The following layouts can be selected.
Note
z The cropped image cannot be newly saved on the memory card.
z The trimming area is displayed only for photos which have been trimmed.
z To change the trimming area once it has been set, press [Trimming] again.
z To cancel trimming while editing the trimming frame, press [Stop/Reset] while the trimming
edit screen is displayed. You can also cancel trimming by switching to any mode other than
Memory card mode.
z To cancel trimming after trimming has been set, press [Trimming] and then press [Stop/
Reset].
Bordered:
x2/x4/x8, Half, Half (w/line)
Borderless:
x2/x4/x8, Half, Half (w/line)
Album:
Album (4/right), Album (4/left)
Mixed:
Mixed 1, Mixed 2, Mixed 3